展会信息港展会大全

android 蓝牙分析
来源:互联网   发布日期:2015-09-28 15:57:11   浏览:1564次  

导读: BluetoothService里定义的Native方法都在android_server_BluetoothServer.cpp里建立jni调用开启由BluetoothEnabler控制,在构造里会先调用 LocalBluetoothManager.getInstance(context),在getInstance里会调......

BluetoothService里定义的Native方法都在android_server_BluetoothServer.cpp里建立jni调用

开启

由BluetoothEnabler控制,在构造里会先调用 LocalBluetoothManager.getInstance(context),在getInstance里会调用init()函 数,BluetoothAdapter.getDefaultAdapter()获得蓝牙设备的句柄,如果当前没有蓝牙设备则返回null。

初始化完毕会监听checkbox的状态,当点击checkbox会调用 LocalBluetoothManager.setBluetoothEnabled(enable)函数。调用mAdapter.enable()到 BluetoothService.enable()开启EnableThread线程,进行打开操作,同时调到 CachedBluetoothDeviceManager.onBluetoothStateChanged来读取上次关闭之前搜索到device.

涉及到的类:

BluetoothService(最主要的类,开启具体命令的线程进行enadble,disable等操作)

LocalBluetoothManager(初始化BluetoothAdapter)

BluetoothEnabler(界面的点击和状态文字的显示)

BluetoothAdapter(建立LocalBluetoothManager和BluetoothService的映射关系,主要是通过它调用BluetoothService的函数)

扫描

在BluetoothSetting里触发点击,调用LocalBluetoothManager.startScanning(true)函数,通过 BluetoothAdapter的startDiscovery调用到BluetoothService里的startDiscovery来调用 Native函数 startDiscoveryNative()。

startDiscovery()是个异步函数,会立即返回,通过注册 ACTION_DISCOVERY_STARTED、ACTION_DISCOVERY_FINISHED、ACTION_FOUND,来确定当前的状态。

当蓝牙由disable变成enable时会调用扫描,当距离上次扫描超过5分钟的前提下,退出页面,再进到页面的时候也会启动扫描。

在启动scan的时候,还会判断当前是否在播放音乐,如果在播放音乐,则不启动扫描。

点击查找设备后,会把设备列表里没有配对的设备清除掉,保留配对状态的设备。

扫描的过程是一个很耗费资源的过程,在扫描过程,不会去尝试进行新的连接,扫描时间默认是12秒,它是以一个系统服务的形式存在的,可以调用cancelDiscovery()来取消扫描。

连接

在setting界面点击连接,会调到CachedBluetoothDevice类的connect方法,调用 updateProfiles(),根据搜索到的device的uuid来向ProfilesList里添加profile,然后遍历 ProfileList,根据不同的profile来获得profileManager。

然后判断当前的device的Priority,如果Priority=100,则去调用queueCommand(new BluetoothJob(BluetoothCommand.CONNECT, this, profile)),去发送连接的命令。如果Priority=1,则不去自动连接。Priority=-1,代表当前的device没有配对。

在queueCommand()函数里,有一个消息队列来处理命令,在这里生成了一个BluetoothJob的实例,来代表要执行的命令。

最终调到processCommand(BluetoothJob job)函数,由它来通过job.command来调用CONNECT: DISCONNECT:REMOVE_BOND:

以A2DP为例,在connectInt里,根据不同的profile来获得profilemanger,然后调用 profilemanger.connect()函数,在这个函数里调用了BluetoothA2dpService的connectSink()函数, 最后调到Native方法connectSinkNative()去建立连接。

涉及到的一些类:

CachedBluetoothDevice(搜索到的设备)

BluetoothDevice(设备类)

LocalBluetoothProfileManager(各种ProfileManger,实例化各种Profile的service)

SettingsBtStatus(蓝牙的状态类)

BluetoothA2dp(为LocalBluetoothProfileManager和BluetoothA2dpService建立映射关系)

BluetoothA2dpService(最终的服务类,由它调用连接、断开等Native函数,和底层通信)

赞助本站

人工智能实验室

相关热词: 蓝牙 BluetoothService

相关内容
AiLab云推荐
展开

热门栏目HotCates

Copyright © 2010-2024 AiLab Team. 人工智能实验室 版权所有    关于我们 | 联系我们 | 广告服务 | 公司动态 | 免责声明 | 隐私条款 | 工作机会 | 展会港