adb 在platform-tools 下，在你的命令行中输入adb help，就可得到其用法说明。
D:\AndroidENV\android\android-sdk\platform-tools>adb help
Android Debug Bridge version 1.0.29
-d- directs command to the only connected USB device
returns an error if more than one USB device is present.
-e- directs command to the only running emulator.
returns an error if more than one emulator is running.
-s <serial number>- directs command to the USB device or emulator with
the given serial number. Overrides ANDROID_SERIAL
environment variable.
-p <product name or path>- simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices- list all connected devices
connect <host>[:<port>]- connect to a device via TCP/IP
Port 5555 is used by default if no port number is specified.
disconnect [<host>[:<port>]]- disconnect from a TCP/IP device.
Port 5555 is used by default if no port number is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devices.
device commands:
adb push <local> <remote>- copy file/dir to device
adb pull <remote> [<local>]- copy file/dir from device
adb sync [ <directory> ]- copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell- run remote shell interactively
adb shell <command>- run remote shell command
adb emu <command>- run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp- list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] [--algo <algorithm name> --key <hex-encoded key> --iv <hex-encoded iv>] <file>
- push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
('-s' means install on SD card instead of internal storage)
('--algo', '--key', and '--iv' mean the file is encrypted already)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport- return all information from the device
that should be included in a bug report.
adb backup [-f <file>] [-apk|-noapk] [-shared|-noshared] [-all] [-system|-nosystem] [<packages...>]
- write an archive of the device's data to <file>.
If no -f option is supplied then the data is written
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks themselves
in the archive; the default is noapk.)
(-shared|-noshared enable/disable backup of the device's
shared storage / SD card contents; the default is noshared.)
(-all means to back up all installed applications)
(-system|-nosystem toggles whether -all automatically includes
system applications; the default is to include system apps)
(<packages...> is the list of applications to be backed up.If
the -all or -shared flags are passed, then the package
list is optional.Applications explicitly given on the
command line will be included even if -nosystem would
ordinarily cause them to be omitted.)
adb restore <file>- restore device contents from the <file> backup archive
adb help- show this help message
adb version- show version num
scripting:
adb wait-for-device- block until device is online
adb start-server- ensure that there is a server running
adb kill-server- kill the server if it is running
adb get-state- prints: offline | bootloader | device
adb get-serialno- prints: <serial-number>
adb status-window- continuously print device status for a specified device
adb remount- remounts the /system partition on the device read-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program
adb reboot-bootloader- reboots the device into the bootloader
adb root- restarts the adbd daemon with root permissions
adb usb- restarts the adbd daemon listening on USB
adb tcpip <port>- restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp <tty> [parameters]- Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partition
is updated.
environmental variables:
ADB_TRACE- Print debug information. A comma separated list of the following values
1 or all, adb, sockets, packets, rwx, usb, sync, sysdeps, transport, jdwp
ANDROID_SERIAL- The serial number to connect to. -s takes priority over this if given.
ANDROID_LOG_TAGS- When used with the logcat option, only these debug tags are printed.
