错误：configure: error: libevent >= 1.4.11 could not be found
解决：yum -yinstall libevent libevent-devel
错误：configure: error: Pleasereinstall the mysql distributio
解决：yum -y install mysql-devel
错误：make: *** [sapi/fpm/php-fpm] error 1
解决：用makeZEND_EXTRA_LIBS='-liconv'编译
错误：configure: error: XMLconfiguration could not be found
解决：yum -y install libxml2 libxml2-devel
错误：configure: error: No curses/termcap library found
解决：yum -y install ncurses ncurses-devel
错误：configure:error: xml2-config not found
解决：yum -y install libxml2 libxml2-devel
错误：configure: error: Cannot find OpenSSL's <evp.h>
解决：yum install openssl openssl-devel
错误：configure:error: Please reinstall the libcurl distribution -easy.h should be in<curl-dir>/include/curl/
解决：yum install curl curl-devel
错误：configure: error: Cannot find ldap.h
解决：yum installopenldap openldap-devel
错误：configure: error: libjpeg.(a|so) notfound
解决：yum install libjpeglibjpeg -devel
错误：configure:error: libpng.(a|so) not found.
解决：yum install libpnglibpng –devel
错误：onfigure: error: freetype.h not found.
解决：yum installfreetype-devel
错误：configure: error: cannot find output from lex;giving up
解决：yum -y install flex
错误：configure: error:mod_deflate has been requested but can not be built due to prerequisite failures
解决：yum -y install zlib-devel openssl-devel
错误：Configure:error: Unable to locate gmp.h
解决：yum install gmp-devel
错误：Configure: error: Cannot find MySQL header files under /usr.
Note that the MySQL client library is not bundled anymore!
解决：yum install mysql-devel
更多的补充内容：
安装php: ./configure
configure:error: XML configuration could not be found
yum -y install libxml2libxml2-devel
Cannot find OpenSSL's <evp.h>
yum installopenssl openssl-devel
1) Configure: error: xml2-config not found. Pleasecheck your libxml2 installation.
#yum install libxml2 libxml2-devel (ForRedHat & Fedora)
# aptitude install libxml2-dev (For Ubuntu)
2)Checking for pkg-config… /usr/bin/pkg-config
configure: error: Cannot findOpenSSL's <evp.h>
#yum install openssl openssl-devel
3)Configure: error: Please reinstall the BZip2 distribution
# yum installbzip2 bzip2-devel
4) Configure: error: Please reinstall the libcurldistribution -
easy.h should be in <curl-dir>/include/curl/
# yuminstall curl curl-devel (For RedHat & Fedora)
# installlibcurl4-gnutls-dev (For Ubuntu)
5) Configure: error: libjpeg.(also) notfound.
# yum install libjpeg libjpeg-devel
6) Configure: error:libpng.(also) not found.
# yum install libpng libpng-devel
7)Configure: error: freetype.h not found.
#yum install freetype-devel
8) Configure: error: Unable to locate gmp.h
# yum install gmp-devel
9) Configure: error: Cannot find MySQL header files under /usr.
Notethat the MySQL client library is not bundled anymore!
# yum installmysql-devel (For RedHat & Fedora)
# apt-get install libmysql++-dev (ForUbuntu)
10) Configure: error: Please reinstall the ncurses distribution
# yum install ncurses ncurses-devel
11) Checking for unixODBCsupport… configure: error: ODBC header file ‘/usr/include/sqlext.h' not found!
# yum install unixODBC-devel
12) Configure: error: Cannot findpspell
# yum install pspell-devel
13) configure: error: mcrypt.h notfound. Please reinstall libmcrypt.
# yum install libmcrypt libmcrypt-devel(For RedHat & Fedora)
# apt-get install libmcrypt-dev
14)Configure: error: snmp.h not found. Check your SNMP installation.
# yuminstall net-snmp net-snmp-devel
15)
/usr/bin/ld: cannot find -lltdl
collect2: ld returned 1 exit status
make: *** [sapi/cgi/php-cgi] Error 1
# yum install libtool-ltdl.x86_64 libtool-ltdl-devel.x86_64
16）
为php编译xcache模块的时候，需要运行phpize
得到了一个错误
#/usr/local/php/bin/phpize
Configuring for:
PHP Api Version: 20041225
Zend Module Api No:20060613
Zend Extension Api No: 220060519
Cannot find autoconf. Pleasecheck your autoconf installation and the $PHP_AUTOCONF
environment variableis set correctly and then rerun this script.
通过安装 autoconf 可以解决
centos下执行 yum install autoconf 即可
Ubuntu下执行 apt-get install autoconf 即可
17）
# /usr/local/php/bin/phpize
Cannot find config.m4.
Make surethat you run '/usr/local/php/bin/phpize' in the top level source directory ofthe module
修改方法：
[root@centos lnmp]# cd php-5.2.14ext/
[root@centosext]# ./ext_skel --extname=my_module
Creating directory my_module
Creating basic files: config.m4 config.w32 .cvsignore my_module.cphp_my_module.h CREDITS EXPERIMENTAL tests/001.phpt my_module.php [done].
Touse your new extension, you will have to execute the following steps:
1. $cd ..
2. $ vi ext/my_module/config.m4
3. $ ./buildconf
4. $./configure --[with|enable]-my_module
5. $ make
6. $ ./php -fext/my_module/my_module.php
7. $ vi ext/my_module/my_module.c
8. $ make
Repeat steps 3-6 until you are satisfied with ext/my_module/config.m4 and
step 6 confirms that your module is compiled into PHP. Then, start writing
code and repeat the last two steps as often as necessary.
[root@centosext]# cd my_module/
[root@centos my_module]# vim config.m4
根据你自己的选择将
dnl PHP_ARG_WITH(my_module, for my_module support,
dnl Make sure thatthe comment is aligned:
dnl [ --with-my_module Include my_module support])
修改成
PHP_ARG_WITH(my_module, for my_module support,
Make sure thatthe comment is aligned:
[ --with-my_module Include my_module support])
或者将
dnl PHP_ARG_ENABLE(my_module, whether to enable my_module support,
dnl Make sure that the comment is aligned:
dnl [ --enable-my_moduleEnable my_module support])
修改成
PHP_ARG_ENABLE(my_module, whether toenable my_module support,
Make sure that the comment is aligned:
[--enable-my_module Enable my_module support])
[root@centos my_module]# vimmy_module.c
将文件其中的下列代码进行修改
/* Every user visible function must have anentry in my_module_functions[].
*/
function_entry my_module_functions[]= {
PHP_FE(say_hello, NULL)/* ?添加着一行代码 */
PHP_FE(confirm_my_module_compiled,NULL) /* For testing, remove later.*/
{NULL, NULL, NULL}/* Must be the last line inmy_module_functions[] */
};
在文件的最后添加下列代码
PHP_FUNCTION(say_hello)
{
zend_printf("hello sdomain!");
}
再修改：php_sdomain.h
viphp_sdomain.h
在PHP_FUNCTION(confirm_my_module_compiled ); /* For testing,remove later. */ 这行的下面添加一行：
PHP_FUNCTION(say_hello); /* For testing, removelater. */
保存文件退出
然后我们就可以在这个目录下使用上面的命令了
/usr/local/php/bin/phpize
执行以后会看到下面的
[root@ns sdomain]#/usr/local/php/bin/phpize
Configuring for:
PHP Api Version:20020918
Zend Module Api No:20020429
Zend Extension Api No:20050606
[root@ns sdomain]#
然后执行./configure--with-php-config=/usr/local/php/bin/php-config
然后执行make
makeinstall
然后他会把对应的so文件生成放到PHP安装目录下面的一个文件夹，并提示在在什么地方，然后再把里面的SO文件拷到你存放SO文件的地方
即你在php.ini里面的extension_dir所指定的位置
最后一步是你在php.ini文件中打开这个扩展
extension=sdomain.so
然后
重新起动apache
